EBB23 Everest Refrigeration Back Bar Cooler, one-section, 23.5" wide, 8.19 cu. ft. cap., (2)

Product Description

Back Bar Cooler, one-section, 23.5" wide, 8.19 cu. ft. cap., (2) shelves, rear mounted refrigeration system, textured black laminated steel exterior, 304 s/s countertop, galvanized steel interior, (4) 4" diameter casters, 115v/60/1, 1/5 HP, 3.9 amps, ETL, ETL Sanitation. We try to provide the best products at the lowest everyday prices here at J.E.S. Restaurant Equipment.

Product Details

Construction: Heavy duty 304 stainless steel countertop, and textured black laminated vinyl exterior. High quality 304 stainless steel interior floor and galvanized steel interior walls. Insulated with 2.5" thick high density foamed-in-place polyurethane foam. Pre-installed 4” diameter casters for model EBB23. Door heater installed around inside cabinet frame to prevent moisture build up.

Refrigeration System: Back mounted condensing unit for model EBB23, and side mounted condensing unit from two door models. Oversized condenser and evaporator coil cools to set temperature in a minimum time period and maintains it. Cool air intake via the front of the unit while warm air exhausted through the side, bottom and rear for high performance of condensation. Environmentally friendly CFC free R-134a refrigerant. Air defrost, temperature initiated and terminated. Energy eficient condensate pan heated by high side anti-corrosive coated tube. Evaporator copper tube and aluminum fins with anti-corrosive coating. Pressure relief port located at exterior back wall for rapid re-entry. One 115 volt / 60 cycle / 1 phase NEMA-5-15P plug. Easy to set temperature with thermostat knob. Temperature range from 33 F to 55 F.

Doors: Textured black laminated vinyl exterior and galvanized steel interior 2" thick foamed-in-place polyurethane foam. One piece snap-in magnetic door gasket for easy replacement. Heavy duty recessed door handles that stay out of the way. Door locks.

Shelving: Two (2) epoxy coated interior shelves per section. 11" pilasters and shelf clips made of 304 series stainless steel.