Meiko Model K-200 PW Commercial Dishwasher w/ High Temperature Sanitize

Product Description

K-Tronic Rack Conveyor Dishwasher, 96-3/8" single tank design w/prewash, one 3 HP wash pump, one 3/4 HP prewash pump, high temperature sanitizing w/built-in booster, 240 racks/hr. capacity, 0.35 gals./rack, pumped auxiliary rinse w/ 3/4 HP pump, pumped final rinse w/ 3/4 HP pump, elec. or steam coil heat, fully automatic operation w/Mike 3 electronic controls, double wall insulated stainless steel construction, Waste Air Recovery System, connection for external vent fan control, includes commissioning & training by Meiko field engineer, Energy Star At J.E.S. Restaurant Equipment we sell commercial dishwashers at wholesale prices.

Product Details

Meiko's K-Tronic series rack conveyor warewashers combine state-of-the-art advanced features with economical and reliable operation. The K-Tronic series features the lowest water consumption of any NSF-rated rack conveyor warewasher, and makes use of an exclusive pumped, heated auxiliary rinse zone to make use of the rinse water a second time for pristine, consistent results. Meiko’s exclusive Waste Air Heat Recovery System reclaims the waste air generated by the machine as free energy to pre-heat the incoming rinse water, saving energy. Other standard features include computer-positioned wash arms (and prewash arms, on models so equipped) that are pre-assembled into easily-removed manifolds. Wash nozzes are slotted and concave to minimize clogging, and feature captivated end caps which can’t be lost during cleaning. K-Tronic series machines also feature Meiko’s Mike 3 electronic controller, and double-wall insulated construction. As with all products synonymous with the name “Meiko,” engineering excellence, manufacturing quality and performance come to the forefront in the K-Tronic series rack conveyors. 
   ♦ Model K-200 includes a 6’ 4-3/4” chamber with one pumped wash section (with 3 hp pump), pumped auxiliary rinse section (with 3 hp pump) and pumped final rinse section (with 3/4 hp pump).
   ♦ Model K-200 PW adds a 19-5/8” prewash section (with 3/4 hp pump) to the base K-200 model (overall length 8’ 1/2”).
   ♦ Model K-200 LPW adds a 31-1/2” prewash section (with 3 hp pump) to the base K-200 model (overall length 9’ 1/4”).

SPECIAL FEATURES:
• The K-Tronic series features the lowest water consumption in the industry. Model K-200 consumes 0.35 gallons per rack.
• Pumped auxiliary rinse zone supplements the final rinse zone, providing pristine, consistent results.
• Waste air heat recovery system reclaims heat generated by the machine and uses it as free energy to preheat the incoming rinse water, reducing energy consumption and allowing hot-water sanitizing from a cold water supply (50°F).
• Double-wall insulated construction retains heat inside the machine, conserving energy and improving the working environment.
• Improved drive system permits fast, smooth conveyor travel. Rack rail-mounted pawl system does not obstruct the wash pattern.
• Mike 3 electronic controller for fully automatic operation and advanced service diagnostics. Wash and final rinse are activated only when a rack is in place to conserve water and detergent.

STANDARD FEATURES:
• Computer-positioned wash arms in easily-removed manifolds feature concave, slotted nozzles to minimize clogging, and captivated end caps.
• Front-sloping wash tanks
• All 304-series stainless steel construction
• Large, easily-removed pan strainers. Models equipped with a prewash include a separate prewash scrap basket.
• Powerful 3hp wash pump is vertically-mounted to be selfdraining and easily removed for servicing.
• Single-point drain connection
• Single-point ventilation connection
• Low-level heater protection

TECHNICAL FEATURES:
• Conveyor speed (ft./min.): 24.12 Low 5.36 Medium 6.57 High
• Racks per hour: 153 Low 196 Medium 240 High
• Water Consumption per cycle: .55 Low .43 Medium .35 High Gallons
• Wash motor: 3 HP
• Prewash pump motor, K-200 PW .75 HP
• Prewash pump motor, K-200 LPW 3 HP

OPTIONAL ACCESSORIES:
• Revolutionary blower drying system - uses only 3 kW for heating. Available in two lengths: 23-5/8” (600mm) or 35-1/2” (900mm)
• CSS Top Chemical Savings System
• Hinged front access doors
• Steam coil or electric tank heating
• Table limit switch
• External vent fan control
• Single-point electrical connection
• 90° loaders and power unloaders

WARRANTY:
• 24/7 365 Support
• 1 Year Parts & Labor