Pitco Commercial Gas Fryer, Twin Basket, 40-45 lbs, 115,000 BTU's. A floor model gas fryer and has a 14 x14 frying area with a 4 - 6 " cooking depth and is made with a welded tank and an extra smooth peened finish that ensures easy cleaning. This Pitco 40D is constructed of long lasting, high temperature alloy stainless steel with heat baffles that are mounted in the heat exchanger tubes to provide maximum heating and combustion efficiency. Pitco 40D fryer has a standing pilot light design that provides a ready flame when heat is required. Floor model fryer has a stainless steel front, door and galvanized steel sides and back. Commercial gas fryer comes with thermostat controls that maintain selected temperature automatically between 200°F and 400°F. Gas floor model fryer with an integrated gas control valve that acts as a manual and pilot valve, automatic pilot valve, gas filter, pressure regulator, and automatic main valve. The gas control valve prevents gas flow to the main burner until the pilot is established and shuts off all gas flow automatically if the pilot flame goes out. Pitco 40D gas fryer has a temperature limit switch that safely shuts off all gas flow if the fryer temperature exceeds the upper limit. Fryer shall have an atmospheric burner system combined with four stainless steel tubes utilizing high temperature alloy stainless steel baffles. Fryer shall have a deep cool zone; minimum 20% of total capacity. Fryer cooking area shall be 14" x 14" with a cooking depth of 4 - 6". 0.2 - 15.2 cm). Heat transfer area shall be a minimum of 575 square inches. Measurements: 15-1/8" W x 34 " H (with flu connector 47 9/32) 30-9/32 D (43 11/16 with door open). Pitco model 40D requires a 3/4 NPT gas line. This unit is the perfect fryer for concession trailers. J.E.S. Restaurant equipment carries a full line of Pitco Commercial Gas Floor model fryers.