Meiko Model K-86E Commercial Dishwasher w/ High Temperature Sanitize

Product Description

Rack Conveyor Dishwasher, 64" double tank design, w/22" prewash, high temperature sanitizing, 277 racks/hr. capacity, 0.39 gals./rack, electric tank heat, fully automatic, 3 hp wash pump, double wall top, front & rear panels, stainless steel construction, chemical hook-ups, vent cowls w/extra curtains, Energy Star. At J.E.S. Restaurant Equipment we sell commercial dishwashers at wholesale prices.

Product Details

Meiko's K-86 rack conveyor warewasher combines stateof- the-art advanced features with economical and reliable operation. Powerful 3 HP wash and recirculating rinse pumps, combined with computer-positioned wash arms with varying spray angles and offset jets, ensure outstanding water coverage and consistent cleaning. Wash and recirculating rinse arms are pre-assembled into easilyremoved manifolds, and feature slotted, concave nozzles (which minimize clogging) and captivated end caps (which can’t be lost during cleaning). Other standard features include fully automatic operation, double-wall insulated construction, a unique external leveroperated drain system, low voltage control circuit, and standard vent cowls with double curtains to reduce splashout. As with all products synonymous with the name “Meiko,” engineering excellence, manufacturing quality and performance come to the forefront in the K-Series rack conveyors.

SPECIAL FEATURES:
• Synchronized side-drive dual rack rail pawl-bar system ensures complete water coverage from every angle, even the bottom of the rack
• Large, insulated front doors are spring-loaded to open easily and STAY open, without latching
• Computer-positioned wash arms in easily-removed manifolds. Manifolds are stainless steel with a unique interlock system to eliminate high-wear O-rings
• Concave, slotted nozzles minimize clogging. Nozzles are computer-positioned at varying angles to maximize water coverage over all areas of the ware
• Powerful 3hp wash pump is 50% more powerful than the industry standard for outstanding cleaning
• Large separation between wash and rinse (16” upper, 17” lower) avoids splashing of soiled water onto sanitized ware
• Front-sloping tanks for complete drainage and easier cleaning
• External, easily-operated lever drain system makes draining fast, safe and simple

STANDARD FEATURES:
• Capacity 277 racks per hour
• Water consumption, standard-height machines (K-86E, K-86S)
   ♦ 107 U.S. gallons per hour
   ♦ 0.39 U.S. gallons per rack
• Water consumption, high-hood machines (K-86ET, K-86ST)
   ♦ 230 U.S. gallons per hour
   ♦ 0.83 gallons per rack
• All 304-series stainless steel construction
• Double-wall insulated construction on front, top and back to improve operator safety, conserve heating energy, and reduce noise and heat loss into the dishroom
• Large, easily-removed pan strainers with separate prewash scrap basket
• Fully automatic operation including auto-fill and auto-start. Prewash, wash and final rinse are activated only when a rack is in place to conserve water and detergent
• Powerful 3hp wash and recirculating rinse pumps. All pumps are vertically-mounted to be self-draining and easily removed for servicing
• Electromechanical controls for reliability and easy operation. Low-voltage 24VAC control circuit for operator safety
• Easily accessible detergent and rinse aid injection ports for fast and easy chemical dispenser installation
• Single-point electrical, water and drain connections. Internal booster heater option adds an additional terminal block for simpler replacement of an existing external booster heater
• Low-level heater protection

TECHNICAL FEATURES:
• Conveyor speed (ft./min.): 7'8"
• Racks per hour: 277
• Water Consumption per cycle: .39 Gallons (K-86E & K-86S) .83 Gallons (K-86ET & K-86ST)
• Wash motor: 3 HP
• Prewash pump motor, 3/4 HP
• Recirculating rinse pump motor, 3 HP
• Dimensions: "W x "D x "H (Varies by model see spec sheet)

OPTIONAL ACCESSORIES:
• Choice of two clearance heights (standard 18” or high hood 26”)
• Internal booster heater (steam or electric heat)
• External booster heater (steam or electric heat)
• Master disconnect
• External vent fan control
• Table limit switch
• Vent cowl collars
• 90° loaders and power unloaders
• Flanged feet
• Drain water tempering kit
• Shock arrestor

WARRANTY:
• 24/7 365 Support
• 1 Year Parts & Labor