Rack Conveyor Dishwasher, 54" single tank design, 8" higher hood

Product Description

Rack Conveyor Dishwasher, 54" single tank design, 8" higher hood w/26" clearance, high temperature sanitizing, 260 racks/hr. capacity, 0.90 gals./rack, electric tank heat, fully automatic, 3 hp wash pump, double wall top, front & rear panels, stainless steel construction, chemical hook-ups, vent cowls w/extra curtains. At J.E.S. Restaurant Equipment we sell commercial dishwashers at wholesale prices.

Product Details

Meiko's K-54 rack conveyor warewasher combines state-of-theart advanced features with economical and reliable operation. A powerful 3 HP wash pump, combined with computer-positioned wash arms with varying spray angles and offset jets, ensures outstanding water coverage and consistent cleaning. Wash arms are pre-assembled into easily-removed manifolds, and feature slotted, concave nozzles (which minimize clogging) and captivated end caps (which can’t be lost during cleaning). Other standard features include fully automatic operation, double-wall insulated construction, a unique external leveroperated drain system, low voltage control circuit, and standard vent cowls with double curtains to reduce splash-out. As with all products synonymous with the name “Meiko,” engineering excellence, manufacturing quality and performance come to the forefront in the K-Series rack conveyors.

SPECIAL FEATURES:
• Synchronized side-drive dual rack rail pawl-bar system ensures complete water coverage from every angle, even the bottom of the rack
• Large, insulated front doors are spring-loaded to open easily and STAY open, without latching
• Computer-positioned wash arms in easily-removed manifolds. Manifolds are stainless steel with a unique interlock system to eliminate high-wear O-rings
• Concave, slotted nozzles minimize clogging. Nozzles are computer-positioned at varying angles to maximize water coverage over all areas of the ware
• Powerful 3hp wash pump is 50% more powerful than the industry standard for outstanding cleaning
• Large separation between wash and rinse (16” upper, 17” lower) avoids splashing of soiled water onto sanitized ware
• Front-sloping tanks for complete drainage and easier cleaning
• External, easily-operated lever drain system makes draining fast, safe and simple

STANDARD FEATURES:
• Capacity 260 racks per hour
• Water consumption, standard-height machines (K-54E, K-54S)
   ♦ 105 U.S. gallons per hour
   ♦ 0.40 U.S. gallons per rack
• Water consumption, high-hood machines (K-54ET, K-54ST)
   ♦ 234 U.S. gallons per hour
   ♦ 0.90 gallons per rack
• All 304-series stainless steel construction
• Double-wall insulated construction on front, top and back to improve operator safety, conserve heating energy, and reduce noise and heat loss into the dishroom
• Large, easily-removed pan strainers with separate prewash scrap basket
• Fully automatic operation including auto-fill and auto-start. Prewash, wash and final rinse are activated only when a rack is in place to conserve water and detergent
• Powerful 3hp wash pump. All pumps are vertically-mounted to be self-draining and easily removed for servicing
• Electromechanical controls for reliability and easy operation. Low-voltage 24VAC control circuit for operator safety
• Easily accessible detergent and rinse aid injection ports for fast and easy chemical dispenser installation
• Single-point electrical, water and drain connections. Internal booster heater option adds an additional terminal block for simpler replacement of an existing external booster heater
• Low-level heater protection

TECHNICAL FEATURES:
• Conveyor speed (ft./min.): 7'3"
• Racks per hour: 260
• Water Consumption per cycle: .40 Gallons (K-54E & K-54S) .90 Gallons (K-54ET & K-54ST)
• Wash motor: 3 HP
• Dimensions: "W x "D x "H (Varies by model see spec sheet)

OPTIONAL ACCESSORIES:
• Choice of two clearance heights (standard 18” or high hood 26”)
• Internal booster heater (steam or electric heat)
• External booster heater (steam or electric heat)
• Master disconnect
• External vent fan control
• Table limit switch
• Vent cowl collars
• 90° loaders and power unloaders
• Flanged feet
• Drain water tempering kit
• Shock arrestor

WARRANTY:
• 24/7 365 Support
• 1 Year Parts & Labor