Everest EBD1 - Kegerator, one-section, 23-1/2"W, (1) solid door, (1) tower, (1) single faucet

Add an extra keg to your bar's selection with this single Keg Direct Draw Refrigerator from Everest Refrigeration. This 23.5 inch wide keg refrigerator holds (2) half barrels of beer and features an attractive stainless steel countertop with a laminated black vinyl exterior, galvanized steel interior walls, and high quality stainless steel floor. The 1-3/4 inch thick high density, foamed-in-place polyurethane insulation keeps your beer properly chilled without driving up energy costs, while the raised rail around the edge of the countertop allows a convenient space for additional glass storage. One draft arm is supplied for drawing beer. The self-contained refrigeration is back-mounted, and uses R-134A refrigerant. An air defrost feature is electrically timed, so it works with your schedule. A single door has a recessed handle and a snap-in magnetic gasket. Condensation on the door is averted by a frame heater. Interior lighting with its own power switch allows you to choose between improved visibility in the cooler and saving energy by turning off the light. The temperature range of 33 to 41F is managed by push buttons and monitored by a microchip. A digital display allows you to keep track of the internal temperature with a quick glance. The EBD1 comes factory standard with four pre-installed 4"Diameter casters for easy relocation of the unit, making it perfect for any small residential, commercial, or patio bar. The warranty of your cooler covers 3 year on parts & labor, 5 year on electrical components, and 10 year on the compressor.

Specifications

Keg Direct Draw Refrigerator, one-section, 8.19 cu. ft. cap

(2) half barrels, rear mounted refrigeration system, (4) 5"Diameter casters

Textured black laminated exterior, 304 s/s countertop, galvanized steel interior

23-1/2"L x 31"D x 39"H

115v/60/1, 1/4 HP, 3.9 amps, NEMA 5-15P

ETL, ETL Sanitation, NSF

WARNING: Attention California Residents - Prop 65 Warning