Everest ESR2 - Reach-In Refrigerator, two-section, 49-5/8"W, (2) full solid doors

A two-section Reach-In Refrigerator with 48 cubic feet of storage can be a life-saver in a busy commercial kitchen. Here's a unit which is constructed of stainless steel, and has 2.5 inch of polyurethane foam insulation to keep it cool. The condenser is top-mounted and uses R-134A refrigerant. An air defrost system is operated on a timer, and can be set to operate every 3 to 12 hours. It's time initiated, and both time and temperature terminated, so it's going to resume cooling at the appropriately. The doors are self-closing and lockable. They have recessed handles and rounded corners. Their frames have door heaters which prevent the build-up of condensation. The doors are also field reversible, in models made from 2013 forward. The interior lighting is incandescent and safety-shielded. Door frame heaters are provided to thwart the build-up of condensation. Six epoxy coated wire shelves are supplied for this unit. The correct temperature range of 33 to 41F is set and adjusted by using the push buttons on the unit. A microchip is used for monitoring the system. You may verify its accuracy by checking your digital display. The piece sets on casters, and the two on front are lockable. Everest backs up the quality of this project with a 3 year warranty on parts & labor, 5 year warranty on electrical components, and 10 year warranty on the compressor.

Specifications

Reach-In Refrigerator, 48 cu. ft.

Two section, two door, six shelves

Fully stainless steel

49-3/4"L x 31-3/4"D x 74-1/4"H

115-60-1, 1/3 HP, 5.06 amps, NEMA 5-15P

ETL, cETLus, NSF

Warranty: 3 Year Parts & Labor, 5 Year Electric Components, 10 Year Compressor

WARNING: Attention California Residents - Prop 65 Warning